Sale!
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$499.00$700.00

Clear

Description

Photos of products are sample images. Actual product may vary.
Note: This harness is for LS1 cable throttle body applications only w/ EV1 style injectors.

Our stock harnesses are 4 feet from the rear of engine passenger side.
Available options Transmission, Electric Fans, Air conditioning and Upgraded Braided loom.

Please call for custom ECM and/or Fuse Box Location,  extra Length.

**Online Harness orders ship with in 1-3 business days**

Built From Scratch Stand Alone Engine Harness

An engine management harness is pretty much what you will find from most wiring harness companies. Basically, it contains all of the necessary functions to make the engine start and run, while also supplying any necessary signals from the computer such as speedometer and tachometer.

Our engine management harness contains any fuses and relays that will be needed, and the required splicing on the consumer’s end of it is fairly basic. There are no main power feeds required for this harness, just a single switched ignition power will switch a relay in the harness that in turn, supplies 12V power to all of the required engine sensors and the ECU.

These harnesses are designed for the hot rod, or project car that will be using aftermarket or mechanical gauges. There is no wiring for oil or temperature gauges since the aftermarket usually supplies sending units and wiring for these.

All of our harnesses, whether it is a complete custom harness, or our engine management harness, come with an easily accessible DLC (Data Link Connector) that is usually long enough to be mounted in the passenger compartment. This allows for easy access to the ECU via a laptop or standard scan tool.
Braided_Loom
Harnesses come covered in standard OE split loom. Optional braided loom available for an extra charge.

The Fuses and Relays for our harnesses come in a compact OEM looking Fuse/Relay center where all of the components are in one central location. The fuse/relay center style is shown below. All of the fuses and relays are labeled on the underside of the covers just like a factory vehicle.

covers fuse_relay

 

 

This harness fits V8 engines out of these vehicles with Cable Throttle body

Additional information

Weight 15 lbs
Dimensions 12 x 12 x 9 in
Intake Style

LS1/6

Add 2 Fans

No, Yes

Transmission Type

None/Non-Electronic, 4L60E, 4L80E, T56

Add Air Conditioning

Yes, No

Braided Loom

Yes, No

1 review for LS1/LS6 Stand Alone Engine Harness -Cable Throttle

  1. Rated 5 out of 5

    anthony.smith8706

    Harness was for LS1 with T56 and is absolute top notch! Can’t say enough good things about this harness. If you have some time with your build like I do, then I would definitely suggest getting a Stand-Alone Harness from these guys. I opted for the braided loom and it looks great! Brandon is very knowledgeable and didn’t pressure me to anything I wasn’t looking for. Plan on ordering my headers very soon!

Add a review

You may also like…