Sale!

$499.00$700.00

4.8L, 5.3L, 6.0L Cable Throttle Wiring Harness

Clear

Description

Note: This harness is for truck engines with cable operated throttle bodies only.

Our stock harnesses are 4 feet from the rear of engine passenger side.
Available options Transmission, Electric Fans, Air conditioning and Upgraded Braided loom.
4L60E and 4L80E Transmission options include 2 connector Park/Neutral switch wiring (PRNDL)

Please call for custom ECM and/or Fuse Box Location,  extra Length.

**Online Harness orders ship with in 1-3 business days**

Built From Scratch Stand Alone Engine Harness

An engine management harness is pretty much what you will find from most wiring harness companies. Basically, it contains all of the necessary functions to make the engine start and run, while also supplying any necessary signals from the computer such as speedometer and tachometer.

Our engine management harness contains any fuses and relays that will be needed, and the required splicing on the consumer’s end of it is fairly basic. There are no main power feeds required for this harness, just a single switched ignition power will switch a relay in the harness that in turn, supplies 12V power to all of the required engine sensors and the ECU.

These harnesses are designed for the hot rod, or project car that will be using aftermarket or mechanical gauges. There is no wiring for oil or temperature gauges since the aftermarket usually supplies sending units and wiring for these.

All of our harnesses, whether it is a complete custom harness, or our engine management harness, come with an easily accessible DLC (Data Link Connector) that is usually long enough to be mounted in the passenger compartment. This allows for easy access to the ECU via a laptop or standard scan tool.
Braided_Loom
Harnesses come covered in standard OE split loom. Optional braided loom available for an extra charge.

The Fuses and Relays for our harnesses come in a compact OEM looking Fuse/Relay center where all of the components are in one central location. The fuse/relay center style is shown below. All of the fuses and relays are labeled on the underside of the covers just like a factory vehicle.

covers fuse_relay

This harness fits V8 engines out of these vehicles with a Cable Throttle body

LR4 applications:

LM7 applications:

L59 applications:

LQ4 (VIN U) Applications:

 

Additional information

Weight 8 lbs
Dimensions 12 x 12 x 10 in
Sensor info

Cable Throttle 24x truck harnesses are intended to work with:
5 wire MAF (Delphi AF10043 or equivalent)
Flat truck style Oxygen sensors (Delphi ES20022 or equivalent)
Blue/Red ECU (GM 12200411 or equivalent)

Reviews

There are no reviews yet.

Be the first to review “Vortec Truck Stand Alone Engine Harness -Cable Throttle”

You may also like…