Custom Built Engine WiringStand Alone Engine WiringModification of Factory HarnessLS2 & LS7 Engine WiringCustom Computer TuningWiring KitsConversion PartsOEM ConnectorsWiring ExtrasCustomer Projects

 

 

 

Current Performance Wiring is proud to be of service since 1999
6330 Pine Hill Rd #16 • Port Richey, FL 34668


 
S10 Long Tube Stainless LSx Header
 
 
AC Lines
 

Direct replacement S-10 overflow tank designed to clear the A/C compressor
when relocated to the top mount position. Includes all mounting points needed
to re-use the factory S-10 computer bracket on 96-up trucks.
Aluminum
$250.00


 
LH8 Oil Pan

GM Muscle Car Oil Pan Kit (P/N 19212593)
Oil Pan from LH8 (Hummer H3 Alpha/Colorado V8)
Kit includes Oil Pan, Gasket, Hardware, Windage Tray,
Pickup Tube, Dipstick, and dipstick tube.
$175.00


 

Sanderson Shorty LS1 S-10 Conversion Headers
For 88-Newer S series trucks and Blazers
Very tight fit and good plug access.
Fits 4.8, 5.3, 6.0, 6.2 Vortec engines and LS1, LS6, LS2, LS7

1-1/2" or 1-5/8" Primary Tubes - Includes all hardware for installation

2WD - LSx
$
230.00 for 1-1/2"
Uncoated
(add $100 for ceramic coating)
Coating option
2WD - LSx
$240.00 for 1-5/8"
Uncoated
(add $100 for ceramic coating)
Coating option
 

Sanderson Shorty LSx S-10 4WD including ZR2 Conversion Headers
For 88-Newer S series trucks and Blazers
Very tight fit and good plug access.
Fits 4.8, 5.3, 6.0, 6.2 Vortec engines and LS1, LS6, LS2, LS7

Only available in 1-5/8" Primary Tubes - Includes all hardware for installation

4WD & ZR2 - LSx
$240.00 for 1-5/8" Uncoated
(add $100 for ceramic coating)

Coating Option

 

S-10 ZR2 LSx swap engine mounts.

Designed to fit an LSx
LS1, LS2, Vortec 4.8, 5.3, 6.0 Engine
in to a ZR2 Truck using a Milodon
4WD LSx S-10 Oil pan.

CAUTION: Will not fit 2WD or Standard 4WD trucks.

$125.00

 

Polyurethane Engine Mounts
Designed as a direct replacement for 2.8L "Clamshell" style mounts.
These mounts are designed to avoid the sagging that accompanies the rubber 2.8L engine mounts

1 Pair - $60.00
(Hardware Not included)

 

Chevy LS1 V8 S10 Mount kit.
Fits 82-newer S-10 and Blazer
Brackets bolt to 2.8 V6 style mounts for simple install.
Fits 4.8, 5.3, 6.0 Vortec engines
and all LSx engines.

Kit includes welded steel brackets, H.D. 2.8L Mounts, and all hardware.

2WD - LSx
Starting at $
85.00
Mount Style
 



Sanderson Shorty LSx
S-10 Conversion Headers and Mount kit

LSx 1-1/2" Headers & Mounts
$
299.25(5% Discount)

Coating/Mount Option

LSx 1-5/8" Headers & Mounts
$
308.75(5% Discount)

Coating/Mount Option
 

Colorado V8 Conversion Parts

Colorado V8 Mounts

V8 Engine Mounts for 04-08 Colorado & Canyon.

LS1 • LS2 • Vortec 4.8, 5.3, 6.0, 6.2
Fits 2WD and 4WD
Includes all necessary hardware

$150.00
Colorado Ign

Modified Ignition Switch for 04-up Colorado & Canyon.

Switch is modified with extra wire output for starter relay on engine swaps that need to bypass the Body Control Module

$125.00
includes $25 refundable core

     

 

 

© 2013 Current Performance Wiring, Inc.

Current Performance, s10, lt1, lt4, ls1, LSx, LS2, LS3, LS7, LS6, hot rod, engine, conversions, engine conversions, performance, chevy, chevrolet, engine wiring, engine electrical, lt1 wiring, lt1 electrical, ls1 wiring, ls1 electrical, harness, wiring, swap, sonoma, s-10 v8 swap parts, s10 v8 conversion, Pontiac Soltice, Saturn Sky, Sonoma, S-15, Highrider