Current Performance Wiring is proud to be of service since 1999
12635 US Hwy 19, Unit 2 • Hudson, FL 34667

LSx Engine Swap A/C Relocation Bracket

LS1• LS6 • LS2 • LS7 • Vortec 4.8, 5.3, 6.0, 6.2

• Stresses and vibrations evaluated with Finite Element Analysis and prototype testing.
• Tensioner placed in its proper position – between the air conditioner compressor
  and the crankshaft pulley, in the “slack” portion of the belt.
• Belt and tensioner geometry optimized for proper belt tension – equivalent to OEM tension requirements.
• All pulleys aligned with each other within SAE specifications.
• Zinc plated fasteners used throughout for corrosion resistance and great appearance.
• All brackets made from 6061-T6 aluminum for light weight, good looks, and rust-free appearance.
• Matches the all-aluminum LSx engines.
• All plates are cut on a computer-controlled, ultra-high pressure water jet.
• All tensioners, pulleys, belts, compressors, alternators, etc. are standard, easily available items.
• Uses Sanden 508, SD5, or SD7 compressor.

Bracket Kit Only $197.00 Balancer Alignment CorvetteCamaroTruck	Bracket Kit with Sanden 508 Compressor $397.00 Balancer Alignment CorvetteCamaroTruck

What's included:
Front and rear compressor attachment plates.
Water pump brace place.
Spacer tubes
Idler pulley mount.
All fasteners needed to attach the brackets to the
engine, and the compressor to the brackets.
Smooth pulley for use on the tensioner. ($25 value)

What else is required to complete the installation:
LS main belt tensioner with 6 groove pulley. (The pulley will be removed and used as the idler pulley.)
Six-rib belt, length such that the tensioner indicator arrow is between the max and min marks.
A Sanden air conditioner compressor, part number 4514 (SD5 series), 4522 (SD5 series), 4665 (SD7
series), or 9537 (508 series). In addition, because of the wide variety of Sanden compressors, other part
numbers with the same pulley placement will work.